Figure 5 – Gasboy 03908X User Manual
Page 10
Installation
Page 10
MDE-4351A Gasboy ATC Kits 039086 and 039087 Installation Manual • February 2006
Figure 5: Wires from IS Barrier Extending Through Shelf
8
At the C06391 9800 CPU Printed Circuit Board Assembly (
and
), disconnect
the connectors connected to the Pulser 1 and Handles jacks.
9
In the kit, locate the 461A2 Circuit Board Assembly (see
for identity). Connect the
assembly to the jacks labeled Pulser 1, Handles, and Pulser 2 on the 9800 CPU PCB.
10
Reconnect the connector removed in Step 8 to the 461A2 Circuit Board Assembly (directly
above the Pulser 1 and Handles connectors).
11
At the 9800 CPU PCB Assembly (
and
), disconnect the connector connected
to the LCD Display jack.
12
In the kit, locate the 460A4 Circuit Board Assembly (see Figure 1 for identity). Connect the
assembly to the jack labeled LCD Display on the 9800 CPU PCB.
13
Reconnect the connector removed in Step 11 to the 460A4 Circuit Board Assembly jack J1 (in
center of board).
Wires from IS Barrier
Grommet