Gasboy 03908X - Manual (Page 20)

Installation
Page 20 MDE-4351A Gasboy ATC Kits 039086 and 039087 Installation Manual • February 2006
16 Connect one end of the second W284 cable to P8 on the 461A2 board ( Figure 18 ) and the
other end to P3 in the LP-70 Polycase box ( Figure 19 ).
Note: Be sure the cables are connected to the connectors as follows:
P1 of 461A2 to P2 of LP-70 Polycase box
P8 of 461A2 to P3 of LP-70 Polycase box
Figure 18: 461A2 Circuit Board in Place with Connections Made
Figure 19: LP-70 Polycase Box Showing Connections
17 In the kit, locate the W283 Display Adapter harness (see Figure 1 for identification).
18 Connect one connector on the harness (both are the same) to J4 on the 460A4 Circuit Board
Assembly (
Figure 20 ) and the other connector to P6/P7 in the LP-70 Polycase box ( Figure 19 ).
461A2 PCB
P1
P8
P3
P2
P5
P6/P7
DIP
Switches