Gasboy 9820A Series - Manual (Page 47)

03/07/03 7-1
Section 7
PREVENTIVE MAINTENANCE
GENERAL
GASBOY pumps are designed and constructed to give many years of uninterrupted service. In
fact, operators report years of trouble-free operation with absolutely no service expense. Yet,
certain parts of a pump are bound to wear, and GASBOY therefore recommends a periodic
inspection, at least twice a year, for such things as fuel leaks, belt tension and condition,
lubrication and strainer cleanliness. If such a procedure is followed, any small adjustments that
are necessary can be made before expensive, annoying breakdowns occur. The result of this
sound approach is continuous, profitable service from all of your GASBOY equipment.
WARNING:
To reduce the risk of electrical shock when servicing, turn off all power to the
pump.
HINTS FOR BETTER PUMP PERFORMANCE
Demand Competent Service
If your pump should stop or fail to operate properly, don't depend upon the repair service of a
general mechanic unless he is thoroughly familiar with the mechanism. Experience shows that the
repair results will be much more satisfactory if you demand the service of a competent
representative of the pump manufacturer. GASBOY has a Distributor Network which services fuel
dispensing and management systems in every section of the country.
Use Authorized Parts
Should excessive wear, rust, or corrosion of parts cause inefficient operation, it is always best to
replace them immediately; but if you want the best results and continuity of the Underwriters' Label
on your pump, be sure they are new authorized service parts supplied by GASBOY. Every part of
a pump is carefully designed for a particular purpose. If it is replaced by an incorrect or
substandard substitute, pump operation will be unsatisfactory. Always use new gaskets or seals
when servicing or rebuilding GASBOY equipment; do not re-use the old ones.
Operate With Reasonable Care
Like any machine, the pump that is operated with reasonable care will last longer and give better
service. Abuse should be avoided (such as dropping the nozzle on the ground, operating the unit
with a dirty strainer, dragging the hose across the concrete island or driveway, running the pump
with the nozzle closed for more than two minutes, etc.). The time and care given to your pumps
will be returned to you in the form of dependable service.