Gasboy 9800 Atlas - Manual (Page 10)

Installation of the Weatherproofing Kit
Page 10 MDE-4687 Weatherproofing Instructions for Atlas™ 9800 Units · August 2007
Figure 9: Application of the Sealant - Bottom Corners
Apply sealant
to lower
inside
corners of
head section,
at four
places.
Application of the Gasket Strip Across the Front Edge of the Rain Gutter
To apply the Gasket Strip across the front edge of the Rain Gutter, proceed as follows:
1 Measure and cut the Gasket Strip from the Kit (027078) to the correct length to fit across the
front of the Rain Gutter.
2 Clean the front surface of the Rain Gutter.
3 Apply a thin bead of sealant across the front surface of the Rain Gutter. See Figure 10 .
Figure 10: Application of the Sealant - Front Surface