FSR PATHFINDER Covers 12X8 THROUGH 32X32 - Manual (Page 46)

46 Pathfi nder Matrix
Destination: Sets the destination that you want to defi ne. Choices are 1 - 4 (standard
destinations), and Aux 1 - 4. This fi eld is independent of the destination(s) currently selected on
the Destination Bus (select 1 – 4)
NOTE: The destination chosen here corresponds to the Destination Button number.
Type: Displays (or sets) the selected destination type.
Select [Single Screen E200] if one Eagle 200 has been added to the destination’s
confi guration.
E200 to Add: Lists all available Eagle 200 units that can be assigned to the selected destination.
Units are identifi ed by their ID number. If an Eagle 200 is currently assigned to
another destination, it will not appear in the list.
E200 to Remove: Lists all assigned Eagle 200 units that can be removed from the selected
destination. Units are identifi ed by their ID number.
Routing Mode: Enables you to set the Eagle 200’s routing mode — either
Internal or External. This function instructs the system how sources are used on the assigned
Eagle 200 unit(s) (select External).
At the bottom of the menu, the Status section dynamically lists the Eagle 200 Ids assigned to the
current destination.
Press {ADD} to add the selected Eagle 200 (on the E200 to Add line) to the current destination
confi guration.
Press {REMOVE} to remove the selected Eagle 200 (on the E200 to Remove line) from the
current destination confi guration.
If there are additional Eagle 200s scroll up to destination and repeat the steps, incrementing the
destination number each time.
The user must also change the Unit ID on the Eagle 200, below is the Remote Control page for the
Eagle 200. Press {BACK} to return to the System Menu..