FSR CB-224 FAN KIT - Manual

FSR
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43967 LIT1367
CB-224 FAN KIT INSTALLATION INSTRUCTIONS
FOR MODEL CB-224 REMOVE DOOR (REFER TO DOCUMENT LIT1364 INCLUDED WITH CB-224) AND
OUTLET GRILL (SEE BELOW). FOR MODEL CB-224P REMOVE DOOR AND POLE MOUNT ASSEMBLY
(REFER TO DOCUMENT LIT1365 INCLUDED WITH CB-224P). INSTALL FAN KIT ASSEMBLY AS SHOWN.
PLUG FAN POWER SUPPLY. RE-ASSEMBLE CEILING BOX.
ROTATE ASSEMBLY AS SHOWN SO SCREWS OF THE
FAN BRACKET SLIP INTO THE SLOTS IN BOTH
MOUNTING TABS. ENSURE THE FAN BRACKET SIDE
TABS ENGAGE THE CAPTURE FEATURES ON THE
POWER OUTLET BOX AND THE KNOCKOUT BRACKET. 2. 1. INSTALL (2) #8-32 x 3/8"-LONG PAN HEAD SCREW
INTO FAN MOUNTING BRACKET (2 TURNS ONLY).
ORIENT FAN KIT ASSEMBLY AS SHOWN AND PUSH
ASSEMBLY UP TO KNOCKOUT BRACKET ANGLED
EDGE.
SECURE FAN KIT ASSEMBLY TO KNOCKOUT BRACKET
BY TIGHTENING THE (2) #8-32 x 3/8"-LONG PAN HEAD
SCREWS. 3.
(2) #8-32 x 3/8"-LONG
PAN HEAD SCREW
DIRECTION
OF SECTION
#8-32 x 1/4"-LONG
PAN HEAD SCREW OUTLET GRILL
(CB-224 ONLY)
FAN KIT ASSEMBLY
(2) #8-32 x 3/8"-LONG
PAN HEAD SCREW
AC BOX
CB-224 OR CB-224P
KNOCKOUT BRACKET
DROP-DOWN
RACK-MOUNT
CARRIAGE
(2) #8-32 x 3/8"-LONG
PAN HEAD SCREW
FAN MOUNTING BRACKET
FAN KIT ASSEMBLY
CAPTURE
NOTCH IN
KNOCKOUT
BRACKET
TAB FOR SECURING
FAN KIT ASSEMBLY TO
KNOCKOUT BRACKET
POSITION TOP OF FAN
MOUNTING BRACKET
TAB TO THIS LOCATION
FAN MOUNTING
BRACKET TAB
ANGLED EDGE