FSR CB-12 FAN KIT - Manual

BOTTOM VIEW SHOWING FAN
KIT ASSEMBLY INSTALLED
FSR
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43196 LIT1327
CB-12 FAN KIT INSTALLATION INSTRUCTIONS
CB-12 OR CB-12P
FAN KIT
ASSEMBLY (2) #8-32 x 1/4"-LONG
PAN HEAD SCREW
(2) KNOCKOUT BRACKET
FOR MODEL CB-12 REMOVE DOOR (REFER TO DOCUMENT C-1115
INCLUDED WITH CB-12). FOR MODEL CB-12P REMOVE DOOR AND POLE
MOUNT ASSEMBLY (REFER TO DOCUMENT C-1116 INCLUDED WITH
CB-12P). INSTALL FAN KIT ASSEMBLY AS SHOWN. ROUTE FAN WIRING
AS REFERENECED IN BOTTOM VIEW. RE-ASSEMBLE CEILING BOX. 1. INSTALL (2) #8-32 x 1/4"-LONG PAN HEAD SCREW
INTO FAN MOUNTING BRACKET (2 TURNS ONLY).
PUSH FAN KIT ASSEMBLY TO TOP SURFACE OF
CEILING BOX.
a
b
c
(a) ROTATE FAN KIT ASSEMBLY AS SHOWN. (b) SLIDE PLATE
DOWN INTO NOTCH OF KNOCKOUT BRACKET. (c) ROTATE
ASSEMBLY AS SHOWN SO TABS OF THE KNOCKOUT
BRACKETS SLIP THROUGH THE OPENINGS ON THE FAN
MOUNTING PLATE. 2.
3. SECURE FAN KIT ASSEMBLY TO KNOCKOUT BRACKET
WITH (2) #8-32 x 1/4"-LONG PAN HEAD SCREW.
FAN KIT ASSEMBLY
(2) #8-32 x 1/4"-LONG
PAN HEAD SCREW
a) PLUG FAN POWER SUPPLY INTO
MOST APPROPRIATE AC SOCKET...
b) ...ROUTE FAN WIRE
ALONG WALL...
SHELF
SHELF
MOUNTING
BRACKET
c) ...SECURE FAN WIRING TO
SHELF MOUNTING BRACKET
WITH CABLE CLAMP (SUPPLIED)
AND HARDWARE (SUPPLIED)
4.
TAB FOR SECURING
FAN KIT ASSEMBLY TO
KNOCKOUT BRACKET
NOTCH IN
KNOCKOUT
BRACKET
FAN KIT ASSEMBLY
(2) #8-32 x 1/4"-LONG
PAN HEAD SCREW
FAN MOUNTING BRACKET