Chapter 3 – Dish Network Solo 351 User Manual
Page 43
Chapter 3
Page 38
Using the System
Mute Button
Press the MUTE button to turn off the TV sound. Press it again to restore the
TV sound.
Note
: You must program the remote to control your TV for the MUTE
button to work as described. See page 72 for instructions.
Volume Button
Press the minus (-) side of the VOLUME button to lower the TV volume.
Press the plus (+) side of the VOLUME button to raise the TV volume.
Note
: You must program the remote to control your TV for the VOLUME
button to work as described. See page 72 for instructions.
Guide Button
Press the GUIDE button to open the
Program Guide
. When the
Program
Guide
is open, press this button to switch among
Favorites Lists
.
Arrow Buttons
•
Change channels - Press the UP or DOWN ARROW button to change
channels.
•
Open the
Browse Banner
- Press the RIGHT ARROW button.
•
Show
Themes
- Press the LEFT ARROW button.
•
Move around within the
Program Guide
, menus, and
Browse Banner
-
Press the UP, DOWN, LEFT, and RIGHT ARROW buttons.
TV/Video Button
If you connect the receiver using its back panel
TV A
NTENNA
/
C
ABLE
I
N
and
C
HANNEL
3–4
connections, use this button to switch the receiver
C
HANNEL
3–4
output between the satellite programming and another
video signal such as cable or broadcast TV antenna connected to the
receiver’s
TV A
NTENNA
/C
ABLE
I
N
.