Foxconn 865A01-PE-6EKRS - Manual (Page 68)

60
Chapter 3 BIOS Description
865A01 G/PE User Manual
CPU THRM – Throttling (default: 50.0%)
This option is used to protect the CPU from overheating. The CPU will be
forced into idle mode after the protection mechanism is turned on. What
we want to set is the percent ratio that the idle time of CPU occupies whole
operation time. The higher this setting is, the lower the temperature of the
CPU decreases. The setting values are 12.5%, 25%, 37.5%, 50%, 62.5%,
75% and 87.5%.
Wake-Up by PCI card (default: Enabled)
This option is used to set the system to be waked up by PCI card. The
setting values are Disabled and Enabled.
Power On by Ring (default: Enabled)
This option is used to set the system to be waked up by Modem. After
turning this function on, remote software can be used to turn on the
computer. This function needs to be supported by the relevant hardware
and software. The setting values are Disabled and Enabled.
Wake Up On LAN (default: Enabled)
This option is used to set the system to be waked up by LAN. The setting
values are: Disabled and Enabled.
USB KB Wake – Up From S3 (default: Disabled)
This option is used to set the system to be waked up by USB equipments
when it is in S3 (Suspend to RAM) mode. The setting values are Disabled
and Enabled.
Resume by Alarm (default: Disabled)
This option is used to set the timing of the start-up function. In order to use
this function, the start-up password function must be canceled.At the same
time it must turn on power of host. The setting values are Disabled and
Enabled.
Date (of Month) Alarm
This option is used to set the timing for the start-up date. The setting
values contain 0-31.
Time (hh:mm:ss) Alarm
This option is used to set the timing for the start-up time. The setting
values contain hh: 0 – 23; mm:0 – 59; ss:0 – 59.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:03 60