Foxconn 865A01-PE-6EKRS - Manual (Page 41)

33
Chapter 2 Installation Instructions
865A01 G/PE User Manual
Audio Header: FP AUDIO
The audio port includes two parts – the Front Audio and Rear Audio. Their
priority is sequenced from high to low (Front Audio to Rear Audio). If head-
phones are plugged into the front panel of the chassis (using the Front
Audio), then the Speaker Out (Rear Audio) on the rear panel will not work. If
you do not want to use the Front Audio, pin 5 , 6, 9 and 10 must be short
connected, and then the signal will be sent to the rear audio port.
Front Audio
MIC AGND
MIC_VCC A5V
R_OUT FR_OUT
NA Empty
L_OUT FL_OUT
1 2
9 10
Connecting the SPDIF/6CH_BRACKET
The SPDIF/6CH_BRACKET output is capable of providing digital or 6 chan-
nel audio to external speakers, or compressed AC3 data to an external Dolby
digital decoder. The motherboard is equipped with one bracket.
Attention:
The empty pin of the SPDIF cable should be aligned to pin 9
on the SPDIF/6CH_BRACKET.
6CH_BRACKET
1 2
9 10
S P D I F C A B L E
NA
AGND
LEFOUT
SR_OUT
VCC SPDIF_OUT
CEN_OUT
SL_OUT
SPDIF_IN
GND
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:02 33