Foxconn 865A01-PE-6EKRS - Manual (Page 121)

113
Appendix
865A01 G/PE User Manual
7. After all information is copied from the Driver CD, the RAID driver installation
disk is finished.
Install WinXP With RAID0:
1. Setup RAID0 in BIOS setup.
2. Insert a WinXP installation CD.
3. Press when the following pictures appear:
4. Insert the previous floppy disk (RAID driver installation disk).
5. Insert a blank floppy disk into the floppy disk drive.
6. Creat the RAID driver installation disk.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:03 113