Foxconn 865A01-PE-6EKRS - Manual (Page 118)

110
Appendix
865A01 G/PE User Manual
3. The available values range from 4KB to 128KB. The strip value should be
based on the planned drive usage. Some suggested selections are listed
below. The default selection is 128KB.
16K_Best for sequential transfers
64K_Good general purpose strip size
128K_Best performance for most desktops and workstations
5. Select option 4. Exit and press the key to exit the RAID
configuration utility. Press key to confirm the exit .
2. Select the strip value for the RAID0 array by scrolling through the available
values by using the UP and DOWN arrow keys and press the key to
select.
4. Press the key after the Create Volume prompt appears to create
the array. Press the key after the prompt to confirm this selection.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:03 110