Foxconn 865A01-PE-6EKRS - Manual (Page 60)

52
Chapter 3 BIOS Description
865A01 G/PE User Manual
Video BIOS Cacheable (Default: Disabled)
This option is used to determine whether the Video BIOS is written into the
buffer memory. The available setting values are: Disabled and Enabled.
Memory Hole At 15M-16M (Default: Disabled)
This option is used to determine whether the 15M-16M address field of
memory is reserved for the ISA expansion card. The available setting values
are: Disabled and Enabled.
Delay Prior to Thermal (Default: 16 Min)
This option is used to set up the time for CPU to enter the energy-saving
mode.
AGP Aperture Size (MB) (Default: 128)
This option is used to set up the memory size occupied by AGP card.
Note: This function does not work when Onboard VGA is used.
Init Display First (Default: Onboard/AGP)
This option is used to set which displayed device will be used first when
your PC starts up. The available setting values are: Onboard/AGP and PCI
Slot.
Note: the following three options are applicable only to MBs using the
865G chipset.
On-Chip VGA (Default: Enabled)
This option is used to enable/disable the Onboard VGA. The available
setting values are: Disabled and Enabled.
On-Chip Frame Buffer Size (Default: 8MB)
This option is used to set the size of the Frame Buffer.
Note: this function does not work when the external display card is used.
Boot Display (Default: Auto)
This option is used to select the display mode used when your PC starts.
The available setting values are: Auto, CRT, TV and EFP.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:02 52