Foxconn 865A01-PE-6EKRS - Manual (Page 43)

35
Chapter 2 Installation Instructions
865A01 G/PE User Manual
AGP Slot (Accelerated Graphic Port)
This motherboard has Accelerated Graphics Port (AGP) slot that only Supports
+1.5V AGP cards. When you use an AGP card, make sure that your AGP card
with +1.5V specification. Note the notches on the card Golden fingers to
ensure that they fit the AGP slot on your motherboard.
AGP Slot
Warning:
The motherboard may be damaged if a 3.3V AGP card is used.
Make sure that your AGP card is 1.5V specification. Note the
notches on the card golden fingers to ensure that they fit the
AGP slot on your motherboard.
Installing an expansion card
1. Before installing the expansion card, read the documentation that came
with it and make the necessary hardware settings for the card.
2. Make sure to unplug the power cord before adding or removing expansion
cards.
3. Remove the bracket opposite the slot that you intend to use.
4. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:02 35