Foxconn 865A01-PE-6EKRS - Manual (Page 108)

865A01 G/PE User Manual
100
Chapter 6 Special BIOS Feature
Hard Disk Selection:
The hard disk selection menu will be displayed after you press the hotkey,
listing all the IDE HDDs installed in your system. You can switch the highlight
bar to make a selection and press “Enter” to confirm it.
Attention:
1) Make sure that you have selected a HDD before entering the main menu.
2) Make sure that the HDD you selected is ATA5 or higher. For the HDDs
lower than ATA5, there will be a message of “No Support” in the HDD list
menu listing beside the name of it.
3) Only one HDD can be opreated at a time;
Note: If you have assigned a password to the selected HDD, you will be
prompted to provide it before proceeding.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:03 100