Chapter 2 installation instructions, Rear panel connectors, Ps/2 mouse port – Foxconn 865A01-PE-6EKRS User Manual
Page 30: Ps/2 keyboard port, Serial port: com1, Parallel port (printer port), Usb 2.0 ports

22
Chapter 2 Installation Instructions
865A01 G/PE User Manual
Rear panel Connectors
This motherboard provides the following ports, as below:
PS/2 Mouse Port
This motherboard includes one standard PS/2 mouse port. You can con-
nect the PS/2 mouse directly into this port.
PS/2 Keyboard Port
This motherboard includes one standard PS/2 keyboard port. If you use a
standard AT keyboard, then you will need a converter to use this port.
Serial port: COM1
This motherboard includes one 9-pin common adapter for serial port COM1.
This port is the 16550 high-speed communication interface used to trans-
fer and receive 16-byte FIFO. You can connect the sequential mouse or
other sequential devices directly to the port.
Parallel Port (Printer Port)
This motherboard includes one 25-pin mother connector for LPT. The par-
allel port is a standard printer port which supports the enhanced parallel
port (EPP), ECP mode, etc.
VGA Connector (supported on 865A01G only)
The VGA connector is for output to a VGA-compatible device.
USB 2.0 Ports
These four Universal Serial Bus (USB) ports are available for connecting
USB 2.0 devices.
1
2
3
5
4
6
COM 1 Port
VGA Port
USB 2.0 Port
PS/2 Mouse Port
S P P / E P P / E C P
Parallel Interface
(Printer Port)
LAN Port
(Optional)
Line-in
Line-out
MIC
1
2
3
6
5
9
1394Port
(Optional)
(Supported on
865A01G only)
PS/2 Keyboard
Port
4
7
8
865A01-FOXCONN-V1.3-EN-121603.p65
2004-5-27, 18:02
22