Foxconn 865A01-PE-6EKRS - Manual (Page 24)

16
Chapter 2 Installation Instructions
865A01 G/PE User Manual
Memory
This motherboard includes four 184-pin slots with 2.6V Double Data Rate
(DDR) Dual Inline Memory Module (DIMM) sockets, so you can install PC3200/
2700/2100 memory. You must install at least one memory bank to ensure
normal operation.
DIMM1
DIMM2
DIMM4
DIMM3
DDR Memory
The DDR SDRAM technology evolved from the mainstream PC66, PC100,
PC133 memory known as Single Data Rate (SDR) SDRAM. DDR memory,
however, has the ability to perform two data operations in one clock cycle,
thus providing twice the throughput of SDR memory.
A DDR DIMM has the same physical dimensions as an SDR DIMM, but it
has a 184-pin footprint compared to the 168-pin of the SDR DIMM. Also, a
DDR DIMM is single notched while an SDR DIMM is double notched.
Therefore, a DDR DIMM is not backward compatible with SDR, and should
be installed only in a socket specially designed for DDR DIMMs.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:02 16