Formax 7102/7102XT Series - Manual (Page 99)

Optical Mark Recognition (see further table
entry). OMR
Standard 1-track OMR code definition. Spe-
cifies the amount of reading marks used and
the functionality linked to each of them (how
each should be interpreted). A definition is
a licenced option. OMR code definition
The person operating an inserting system. Operator
Optical Mark Recognition is intended for
reading and interpreting printed codes.
These codes are one or more black marks
which are read from a document. These
marks give information to the inserting sys-
tem about how to build-up and handle a set. Optical Mark Recognition
(OMR)
Fitted at the output for filled envelopes to be
ejected onto. Higher capacity alternative to
a receiving tray. 2 lengths are available. Output Conveyor
The feed hopper unit fitted to a Tower. A
Tower is available with either 1 or 2 pods,
each one consisting of either 2 x 500-sheet
trays or 1 x 1000-sheet tray. Pod
Condition in which the system could not reli-
ably read or interpret the OMR reading marks
or barcode from a sheet. Reading error
Marks added to documents containing finish-
ing instructions that can be identified by an
reading head and interpreted according to
the used OMR code definition. Reading marks
Fitted at the output for filled envelopes to be
ejected into. Basic alternative to an Output
Conveyor. Receiving tray
The feature that makes it is possible to ana-
lyze a problem on an inserting system from
a remote location. Remote diagnostics
Technical engineer whose task it is to resolve
problems with systems in the field. Besides
dealing with problems, service engineers are
also responsible for preventive maintenance. Service engineer
96
| Page 96 | aug-29-2014 10:01 | Glossary of terms
11
English