Formax 7102/7102XT Series - Manual (Page 84)

Technical Specification 10
Inserter head
Parameters
Maximum pack thickness is defined as the internal dimension of
a rigid opening that a filled envelope will fall through under its
own weight.
up to 6mm (¼”) All envelope sizes:
Pack thickness
The minimum clearances required between the inserts and envelopes
are dependent on insert pack thickness.
Clearance is the total clearance and is defined as the difference between
the largest overall dimensions of the pack and the internal dimensions
of the envelope (see below). The required clearances are summarised
as follows:
Pack <3mm: Depth 6mm (¼”) Width 16mm (5/8”)
Pack >3mm <6mm: Depth 12mm (½”) Width 19mm (¾”)
Pack clearance
Series: Up to 4500 envelopes per hour (based on 1 xOHWWHU folded
sheet into a
envelope).
;7 Series: Up to 5500 envelopes per hour (based on 1 xOHWWHU folded
sheet into a
envelope).
Speeds for other conditions available on request.
Cycling speed
Series: Up to 150,000 filled envelopes per month.
;7 Series: Up to 180,000 filled envelopes per month.
Monthly volume
81
| Page 81 | aug-29-2014 10:01 | Technical Specification
10
English