Formax 7102/7102XT Series - Manual (Page 24)

Running an existing job 5
Running an existing job
This section describes running an existing pre-programmed job. To create a new job, see
Creating a job on page 26.
If the IMOS operating software is not already running, it must be started using the icon on
the monitor screen. To access the PC to switch it on, open the cupboard door below the
inserter head.
Before running a job, the paper hoppers must be loaded with stationery - see Loading the
paper hoppers on page 51 for details.
Paper is normally loaded in the Tower face-up and feet-first if
non-reading, but may be either way up if reading, depending upon
whether top or bottom reading. See also appendix A.
When using the cascade function, the Run button must be pressed
while the machine is still running, after you have reloaded the empty
hopper. This ensures the paper is fed to its pre-load position.
If this is not carried out the machine will stop, even though the
hopper is full: if this happens, press the Run button to continue.
1. If the Job screen is not already displayed, press the Jobs button at the top and select
the required job from the list (use the scroll arrows if needed).
2. Summary of selected job is shown.
21
| Page 21 | aug-29-2014 10:01 | Running an existing job
5
English