Formax 7102/7102XT Series - Manual (Page 89)

Insert Feeder
Parameter
Minimum width: 140mm (5½”)*
Maximum width: 241mm (9½”)
Minimum length: 76mm (3”) for module 1
89mm (3½”) for following
modules
Maximum length: 152mm (6”)
*For individual items. Min. pack width:
210mm (8¼”)
Insert Sizes(Single hopper)
Minimum 60gsm (16lbs bond) min.
Maximum 4mm (5/32”) thickness Paper weight
Up to 300 BREs or 150 2mm booklets
Note: Quantities shown above are maxima.
Depending
upon other conditions, actual quantities may
be lower
than those shown. Hopper capacity
Minimum width: 140mm (5½”)*
Maximum width: 241mm (9½”)
Minimum length: 76mm (3”) for module 1
89mm (3½”) for following
modules
Maximum length: 152mm (6”)
*For individual items. Min. pack width:
210mm (8¼”)
Insert Sizes(Tower hopper)
Minimum 60gsm (16lbs bond) min.
Maximum 2mm (5/64”) thickness (top tray)
Maximum 4mm (5/32”) thickness (lower tray) Paper weight
Up to 200 BREs or 100 2mm booklets
Note: Quantities shown above are maxima.
Depending
upon other conditions, actual quantities may
be lower
than those shown. Hopper capacity
86
| Page 86 | aug-29-2014 10:01 | Technical Specification
10
English