Formax 7102/7102XT Series - Manual (Page 96)

The document set is the physical collection
of address carrier and enclosure(s) that is
under production in the inserting system. The
document set is completed during production
and is to be inserted into the envelope. The
number of enclosures can range from 0 to
the limit imposed by the number of available
feeders, whilst observing the overall pack
thickness. Once the document set has been
inserted into an envelope it is called mail set. Document set
Double Document Detection is the sensor
that measures the thickness of a sheet to
check if the inserting system does not acci-
dentally take more sheets than intended. DD
sensors exist on feeders (double sheet de-
tection). Currently DD detection on Neopost
inserting systems perform relative measure-
ments, which means that they need a cycle
to ‘learn' the thickness of a sheet. Also the
length of the document is measured so partly
overlapping sheets will be detected. Double Document Detection
The double parallel fold is a type of fold
where the document is first folded halfway
and the resulting folded set is again folded
halfway. This fold is illustrated in the picture
below. The position of both folds is ad-
justable.
Double parallel fold
The envelope is the packaging of a mail set.
Window envelopes are envelopes that have
a transparent section through which the ad-
dress on the address carrier can be read.
Besides the normal top closing window en-
velopes there are also bottom closing envel-
opes. Envelope
Situation in which the front of a sheet is fa-
cing downwards when placed in a document
feeder. Face down
11
English
93
| Page 93 | aug-29-2014 10:01 | Glossary of terms