Formax 7102/7102XT Series - Manual (Page 45)

2. Set Batching to Batch On if required and set required quantity in Batch Quantity.Set
Batch Mode as follows:
Batch and Continue:
Machine will pause for the specified pause time, and then resume.
Conveyor will continue to run during the pause time.
Batch and Stop:
Machine will stop and resume only when the Run button is pressed.
Select Envelope Count under Batch Control, currently the only available option.
Set the Batch Complete Pause Time as described in Batch and Continue above.
When settings are complete, press the Save button.
3. If a conveyor is fitted, select Conveyor Settings to adjust the Jog functions as follows:
Single Jog Adjust: Adjusts default jog step (gap) between mailpieces. Note that steps
are unitless.
Batch Complete Jog Step: Adjusts gap before machine performs action described
in ‘Batch Mode’.
Mark Reading Jog Step: Adjusts gap created after Jog mark is read.
Autoend Jog Step: Adjusts gap created before machine autoends.
When settings are complete, press the Save button.
42
| Page 42 | aug-29-2014 10:01 | Creating a job
7
English