Formax 7102/7102XT Series - Manual (Page 59)

Loading the tower folder hoppers
The tower folder may be fitted with 500-sheet or 1000-sheet hoppers, or only a single
00-sheet hopper. The example shown has 1 x 500-sheet and 1 x 1000-sheet hoppers.
1. On 500-sheet hoppers,
ORRVHQ the black knob next to the side guides (arrowed) and
move the guides to give 1-1.5mm clearance each side.
On 1000-sheet hoppers, press down on the tray to lower it.
/RRVHQ the black knob
above the hopper (arrowed) and use the tabs to move the guides to give 1-1.5mm
clearance each side. The tray will raise automatically when the machine is started.
2. Tighten the knobs.
Paper orientation in the hoppers will depend upon the job
requirement - see the paper orientation chart.
56
| Page 56 | aug-29-2014 10:01 | Loading the paper hoppers
8
English