Formax 7102/7102XT Series - Manual (Page 100)

A single fold implies the document set is fol-
ded once. The fold position is adjustable.
This fold is illustrated below:
Single fold
Counter which sets the amount of envelopes
to be filled. After filling this amount of envel-
opes the system will stop. Stop counter
Person who is responsible for the technical
state of the system. Normally a supervisor
has access to programming functions, which
are restricted for standard users. Supervisor
A test run is intended to validate the settings
of the inserting system:
• Inspect and adjust the stop position of
the envelope.
• Check the fold settings for one set.
• Check whether the address is correctly
positioned behind the envelope win-
dow.
Test run
Contains a stack of paper for a printer or in-
serter. This paper is supplied to the system
for further processing. Tray (or hopper)
The vertical transport section between hop-
pers and folder/ collator below . Vertical transport
A Z-fold means that a document is folded
twice in such a way that each folded flap is
on a different size of the folded document,
resulting in a Z-shape. This fold is illustrated
below.
The position of both folds is adjustable.
Z-fold (also known as zigzag fold)
11
English
97
| Page 97 | aug-29-2014 10:01 | Glossary of terms