Formax 7102/7102XT Series - Manual (Page 87)

Built-in wetter tank, automatically pump-fed by 10-litre wetter container
located in stand. Optional low-level float switch available. Envelope seal-
ing fluid
Tower Folder
Parameters
Minimum width: 140mm (5½”)
Maximum width: 228mm (9”)
Minimum length: 140mm (5½”)
Maximum length: 406mm (16”)
Note: The maximum suggested width difference between inserts is
32mm (1¼”): this may be
increased subject to test. If this difference
is exceeded, the insertion fingers will not cover the edges of the narrow
insert and may cause insertion problems. Sandwiching a narrow in-
sert between two wider ones may resolve this.
Paper Size
Minimum 60gsm (16lbs bond)
Maximum 120gsm (32lbs bond) for folded documents
Maximum 4mm thick for unfolded inserts (subject to test) Paper weight
84
| Page 84 | aug-29-2014 10:01 | Technical Specification
10
English