Reference, Settings reference, Basic tab – equinux VPN Tracker 8.1.1 User Manual
Page 43: Se the → settings reference, Heck out the, Settings reference in this manual, Connecting to your new vpn t, Settings reference in this, Setting reference if y, Reference settings reference
Reference
Settings Reference
This chapter describes the settings available in VPN Tracker.
Settings are grouped by location and sorted from top to
bottom as they occur in VPN Tracker. Where possible, related
settings and the corresponding settings on a VPN gateway
(and the terms different vendors use) are also included.
Basic Tab
Connection Name
A name for the connection. You may choose any name you like.
Availability: always (use the Edit menu to change the name if locked)
VPN Gateway
The public IP address or host name of the VPN gateway to connect to.
Related Settings: Advanced > IPv6 > Use IPv6 VPN gateway address when
available
Availability: always
VPN Gateway Setting: WAN IP address, public IP address, external IP address
Network Configuration
VPN Tracker supports a number of vendor-specific and vendor-independent
automatic configuration methods.
Mode Config
A vendor-independent automatic configuration method that is capable of
transmitting the settings for the local address and the remote DNS settings
(DNS servers and search domain).
The "active" and "passive" variants are used to resolve interoperability issues
with some devices.
Related Settings: Basic > Network Configuration > Local Address
Basic > Remote DNS > Receive DNS Settings from VPN Gateway
Availability: Depending on the selected device profile. Use a custom device
profile to be able to select any method.
VPN Gateway Setting: Mode Config, Config Mode, IKE-CFG
43