Chapter 10 – DFI DT122-CR Manual User Manual
Page 79
www.dfi .com
79
Chapter 10 Intel AMT Settings
Chapter 10
21. In the User Consent Configuration menu, select User Opt-in then press Enter. Select
None then press Enter.
[ENTER] = Access
Intel(R) Management Engine BIOS Extension v8.0.0.0057/Intel(R) ME v8.0.1.1399
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
USER CONSENT
User Opt-in
< KVM>
Opt-in Confi guration from Remote IT
< Enabled>
NONE
KVM
ALL
22. In the User Consent Configuration menu, select Opt-in Configurable from Remote
IT then press Enter. Select Disable Remote Control of KVM Opt-in Policy then press
Enter.
Intel(R) Management Engine BIOS Extension v8.0.0.0057/Intel(R) ME v8.0.1.1399
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
USER CONSENT
User Opt-in
< KVM>
Opt-in Confi guration from Remote IT
< Enabled>
Disabled
Enabled
23. Select Previous Menu until you return to the Intel(R) AMT Configuration menu. Select
Password Policy then press Enter.
You may choose to use a password only during setup and configuration or to use a pass-
word anytime the system is being accessed.
Intel(R) Management Engine BIOS Extension v8.0.0.0057/Intel(R) ME v8.0.1.1399
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
INTEL (R) AMT CONFIGURATION
Manageability Feature Selection
< Enabled>
> SOL/ IDER/ KVM
> User Consent
Password Policy
> Network Setup
Activate Netwok Access
Unconfi gure Network Access
> Remote Setup And Confi guration
[ENTER] = Select Entry [ESC]= Exit
Default Password Only
During Step And Confi guration
Anytime
24. In the Intel(R) AMT Configuration menu, select Network Setup then
press Enter.
Intel(R) Management Engine BIOS Extension v8.0.0.0057/Intel(R) ME v8.0.1.1399
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
INTEL (R) AMT CONFIGURATION
Manageability Feature Selection
< Enabled>
> SOL/ IDER/ KVM
> User Consent
Password Policy
>
Network Setup
Activate Netwok Access
Unconfi gure Network Access
> Remote Setup And Confi guration
[
] = Move highlight [ENTER] = Select Entry [ESC]= Exit