DFI DT122-CR Manual - Manual (Page 26)

www.dfi .com
26
Chapter 5 Ports and Connectors
Chapter 5
Audio
Rear Audio
The system board is equipped with 3 audio jacks. A jack is a one-hole connecting interface for
inserting a plug.
• Mic-in Jack (Pink)
This jack is used to connect an external microphone.
• Line-in Jack (Light Blue)
This jack is used to connect any audio devices such as Hi-fi set, CD player, tape player, AM/
FM radio tuner, synthesizer, etc.
• Line-out Jack (Lime)
This jack is used to connect a headphone or external speakers.
Front Audio
The front audio connector allows you to connect to the second line-out and mic-in jacks that
are at the front panel of your system.
Line-out
Line-in
Mic-in
Rear audio
Front
audio
1
Mic2-L
Line2-R
Front_IO_Sense
GND
Presence Signal
Key
2
10
Mic2-JD
Line2-JD
9
Mic2-R
Line2-L
BIOS Setting
Configure the onboard audio in the Chipset menu (“South Bridge” submenu) of the BIOS. Re-
fer to chapter 7 for more information.
Driver Installation
Install the audio driver. Refer to chapter 8 for more information.