Updating the bios, Chapter 7 save & exit – DFI DT122-CR Manual User Manual
Page 52
www.dfi .com
52
Chapter 7 BIOS Setup
Chapter 7
Save & Exit
Reset the system after
saving the changes.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
SATA SM: ATAPI iHAS324 Y
SATA PM: WDC WD6402AAEX-00Z3A
Launch EFI Shell from fi lesystem device
Chipset
Advanced
Main
Boot
Security
Save & Exit
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
ESC: Exit
Save Changes and Reset
To save the changes, select this field and then press
will appear. Select Yes to reset the system after saving all changes made.
Discard Changes and Reset
To discard the changes, select this field and then press
box will appear. Select Yes to reset the system setup without saving any
changes.
Restore Defaults
To restore and load the optimized default values, select this field and then
press
values of all the setup options.
Save as User Defaults
To save changes done so far as user default, select this field and then press
Restore User Defaults
To restore user default to all the setup options, select this field and then
press
Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility, AFUDOS.EXE. Please
contact technical support or your sales representative for the files.
To execute the utility, type:
A:> AFUDOS BIOS_File_Name /b /p /n
then press
C:\AFU\AFUDOS>afudos fi lename /B /P /N
+--------------------------------------------------------------------------------------------------------+
AMI Firmware Update Utility(APTIO) v2.25
Copyright (C)2008 American Megatrends Inc. All Rights Reserved.
+--------------------------------------------------------------------------------------------------------+
|
|
|
|
Reading
fi le ..............................
Erasing
fl ash .............................
Writing
fl ash .............................
Verifying
fl ash ..........................
Erasing BootBlock ....................
Writing BootBlock ....................
Verifying BootBlock .................
C:\AFU\AFUDOS>
done
done
done
done
done
done
done