DFI DT122-CR Manual - Manual (Page 13)

www.dfi .com
13
Chapter 3 Installing Devices
Chapter 3
4. Turn to the other side of the drive bay. Use the provided mounting screws from step 2 to
secure the SATA drive (with the HDD) onto the drive bay.
Mounting screw
Drive bay
Mounting screw
5. Place the SATA drive bay assembly into the chassis. Secure the SATA drive bay with the
mounting screws you removed in step 1.
Mounting screw
Mounting screw
6. Connect the SATA data cable and SATA power cable to the connectors on the SATA drive.
SATA data cable SATA power
cable