Chapter 3 – DFI DT122-CR Manual User Manual
Page 14
www.dfi .com
14
Chapter 3 Installing Devices
Chapter 3
lnstalling a 3.5" SATA Drive
Drive bay
spacer
spacer
3. Place the SATA drive on the drive bay. Align the mounting holes of the SATA drive with the
mounting holes on the drive bay.
SATA drive
Drive bay
4. Use the provided mounting screws to secure the SATA drive onto the drive bay.
5. Place the drive bay into the chassis. Secure the drive bay with the mounting screws you
removed in step 1.
Mounting screw
Drive bay
Mounting screw
Mounting screw
Mounting screw
6. Connect the SATA data cable and SATA power cable to the connectors on the SATA drive.
SATA data cable
SATA power cable
1. Remove the 4 mounting screws that secure the drive bay to the system.
Mounting screw
Mounting screw
Drive bay
2. Insert the spacer into the anti-shock bumper. You will fi nd the spacers in the HDD drive bay kit
that comes with the DT122 package.