Daktronics AE-3010-7.6-R,G,A - Manual (Page 76)

Appendix C: Optional Temperature Sensor
The temperature sensor connects to the display through a 4-conductor shielded cable from the
sensor to the display. The connections are pinned one-to-one, as shown in
Figure 38 and the
provided table.
Figure 38: Signal Connection from Sensor to Display
Terminations from Display to Temperature Sensor
Display Cable Wires Temperature Sensor
Pin 1 Green Temp RX-P (Pin 1)
Pin 2 White Temp RX-N (Pin 2)
Pin 3 Red Temp +5V ( Pin 3)
Pin 4 Black Temp GND (Pin 4)
Pin 5 Bare N/A
C-2