Daktronics AE-3010-7.6-R,G,A - Manual (Page 69)

Power
2-1
Section 2: Electrical and Signal
WARNINGS:
• Never install telephone wiring during a lightning storm
• Never touch uninsulated telephone wires or terminals unless the telphone line has
been disconnected at the network interface
• Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electrical shock from lightning.
• To reduce the risk of fire, use only 26AWG or larger telecommunication line cord.
• This product is to be used with UL and c-UL listed computers
2.1 Electrical Ratings
The Signal Converter is rated for 120 VAC of power in and a maximum draw of
39mA.
2.2 Power Disconnect
The power cord serves as the disconnect device and the socket outlet must be
installed near the equipment and must be easily accessible.
2.3 Parts Listing
The following parts may need replacing during the life of the component. Servicing
should be conducted by qualified personnel only.
Part Description Part Number
Fuse; AGC-1, 1A, Glass Tube 250 V F-1019
6 Pin Fem, 5 mm, TB Mate, Screw P-1051