Daktronics AE-3010-7.6-R,G,A - Manual (Page 17)

Mechanical Installation 2-1
Section 2: Mechanical Installation
Note: Daktronics does not guarantee the warranty in situations where the sign is not
constantly in a stable environment.
Daktronics engineering staff must approve any changes made to the display. If any
modifications are made, detailed drawings of the changes must be submitted to Daktronics
for evaluation and approval, or the warranty may be void.
Daktronics is not responsible for installation or the structural integrity of support
structures done by others. It is the customer’s responsibility to make sure that a qualified
structural engineer has ensured the structure and any additional hardware.
2.1 Mechanical Installation Overview
Because every installation site is unique, there is no single Daktronics-approved
procedure for mounting the Galaxy signs. The information contained in this section
is general information only and may or may not be appropriate for your particular
installation.
A qualified individual must make all decisions regarding the mounting of this
sign.
Read both the mechanical and electrical installation sections of this manual
before beginning any installation procedures.
2.2 Support Structure Design
Daktronics recommends either a wall mount or a hanging mount method.
Remember to have all mounted displays inspected by a qualified structural engineer.
Daktronics is not responsible for the installation or the structural integrity of
support structures done by others.
2.3 Display Ventilation Requirements
Fresh air inlets and exhaust vents should not be obstructed in any way. To ensure
proper ventilation, use the Daktronics suggested mounting methods. Consult a
Daktronics sales representative for clearance requirements regarding your particular
display if you are using a different mounting method. If ventilation requirements are
not met, the display warranty will be void.