Cybex 55620H Modular - Manual (Page 91)

Figure 11
C. Locate two BHSCS .50-13 x 1.25 (#60), two split lockwashers .50 (#87), two hex nuts .50-13
(#64) and two hole plugs (#61). For the Free Standing configuration, also locate (from step 4B)
one SHCS .50-13 x 3.25 (#65D), one split lockwasher .50 (#65E) and one hex nut .50-13
(#65B).
D. Install the Leg Extension/Leg Curl Assembly to the column. See Figure 12 for
Modular/Tandem configurations and Figures 12A and 12B for Free Standing configuration.
E. Install hole plugs (#61) to the Leg Extension/Leg Curl Assembly (Modular/Tandem
configurations only). See Figure 11.
Figure 12A Figure 12B
65B
65E
65D
60
60
87
87
64
60
60
87
87
64
61
61
Cybex Modular Owner’s Manual
Page 4-37