Cybex 55620H Modular - Manual (Page 67)

G. Locate the pulley mount (#59), three SHCS .500-13 x 2.50 (#76), three split lockwashers
.500 (#57) and three hex nuts .500-13 (#13).
H. Attach pulley mount (#59) to column as shown in Figure 8. Securely tighten hardware.
Figure 8
76
57
13
13
57
F. Remove both SHCS .500-
13 x 2.50 #76), both split
lockwashers (#57) and both
guide rod collets (#60)
securing guide rods (#69).
Remove guide rods from
column.
Figure 7
I. Reinstall both guide rods. NOTE: Do not securely tighten guide rods at this time.
76
57
57
60
69
59
Column
Cybex Modular Owner’s Manual
Page 4-13