Cybex 55620H Modular - Manual (Page 153)

Assembly Notes
1. Keep all shipping packages near area of
installation. Standard items include:
• Cable Column Assembly - 5315A001-9x
• Cable Column Package - 5315-50
• Cable Column Upper Arm Kit - 5315K002
(if applicable)
• Cable Column Lower Arm Kit - 5315K003
(if applicable)
• Top Weight Package (15-3 x 12, black) -01475
• Weight Pack 1 (3 x 12, black) - 4700S110
NOTE: x denotes specific color.
NOTE: Refer to the exploded-view assembly diagram
when performing steps listed below.
2. Attach handrail to column.
3. Install lower pulley bracket (item 8). Install upper
pivot tube (item 50) and upper pulley mount (item 7).
4. Install Upper Boom. See Cable Column With Booms
diagram, located on this instruction sheet and
Upper Boom instructions, supplied with Upper
Boom kit.
NOTE: if not installing Upper Boom, then install
short top tube (item #84).
5. Set chrome tube into hand rail assembly.
Fasten upper portion finger tight.
6. Install Lower Boom if applicable. See Cable
Column With Booms diagram, located on
this instruction sheet and lower boom instructions
supplied with Lower Boom kit.
7. Attach lower portion of hand rail to column.
8. Route cable. NOTE: Be sure to insert cable
through brass bushing. See Cable Routing
Detail.
9. Install weight stack.
10. Install base stabilizers (item #83).