Cybex 55620H Modular - Manual (Page 72)

D. Verify that you received the appropriate number of weight plates.
E. Remove the two SHCS securing the guide rods.
F. Carefully lean guide rods away from column.
G. Remove guide rod collets and plastic caps.
H. Wipe guide rods clean over entire length. Lubricate with light coating of medium weight
automotive engine oil.
I. Install each weight plate one at a time.
J. Install top weight.
K. Replace plastic caps and guide rod collets on guide rods.
L. Return guide rods to full upright position.
M. Insert both SHCS that were removed in step 6A.
NOTE: Do not secure top weight at this time.
Cybex Modular Owner’s Manual
Page 4-18