Comtech EF Data MBT-5003 - Manual (Page 68)

MBT-5003 L-Band Up/Down Converter System Revision 1
Ethernet Management MN-MBT5003
6–12
System Account Access Information
• Admin, Read/Write, and Read Only Names and Passwords:
The factory defaults for these names/passwords are:
o Admin comtech/comtech
o Read/Write opcenter/1234
o Read Only monitor/1234
Note the following:
o These Name fields can be any alphanumeric combination with a maximum
length of 10 characters.
o These Password fields can be any alphanumeric combination with a maximum
length of 10 characters.
• SMTP Server: Specify the mail server IP address from where you want to send the
e-mail.
• SMTP Domain Name / Destination: The Administrator can assign the SMTP Domain
Name and Destination. This is required if the e-mail feature of the Support Page (Sect.
6.5.5.1.3) is to be used.
o For SMTP Domain Name, specify the domain of the e-mail server (usually
found to the right of the @ symbol in an e-mail address).
o For SMTP Domain Destination, specify the e-mail recipient name (usually
found to the left of the @ symbol in an e-mail address).
Once the desired configuration settings have been made in this section, click [Submit Access] to
save these changes. Otherwise, click [Reset] if it is desired to revert back to the previously
assigned System Account Access Information.