Comtech EF Data MBT-5003 - Manual (Page 62)

MBT-5003 L-Band Up/Down Converter System Revision 1
Ethernet Management MN-MBT5003
6–6
2. Start a Telnet session
with the unit at the
default IP address of
192.168.1.5:
3. Enter the Telnet username
and password (the default
for both parameters is
comtech):
Failure to enter the correct User name and Password will return the user to a blank login
screen.
6.5.3 Web Server Interface Access
Note: The IP Address can be found by following the pathway CONFIG: Remote Control Æ
Ethernet Æ Address. See Chapter 5. FRONT PANEL OPERATION for further information.
1. From the PC, type http://192.168.1.5 (the
default IP address for the MBT-5003) into
the Address area of the Web browser:
2. The Login window will appear, and the user is prompted to
type a User Name and Password:
Default User Name – comtech
Default Password – comtech
Type the User Name and Password, then click [OK].
Failure to enter the correct
User name and Password will
return the user to a blank
Login window. If multiple
invalid logins are attempted,
the browser will display the
following access error
message: