Comtech EF Data SNM-1001 - Manual (Page 91)

Remote Control Operation SNM-1001 Network Control Modem
A–32 Rev. 1
A.5 Stored Faults
Information on stored faults is returned when requested. If no stored fault exists for a
given fault number, the words “NO Fault” will be returned instead of the normal
time/date status information.
The following symbols are commonly used to define the stored faults status commands:
•
# Fault number (0 to 9). “0” is the first fault stored.
•
hh Hours in 24-hr. format.
•
mm Minutes.
•
ss Seconds.
•
MM Month.
•
DD Day.
•
YY Year.
Modulator
Stored
Faults Command:
Response: >add/MSF_# hh:mm:ss MM/DD/YY'cr'
MOD_xxx'cr'
SYN_xxx'cr'
DCS_xxx'cr'
ICH_xxx'cr'
QCH_xxx'cr'
AGC_xxx'cr''lf']
Module (OK/FLT)
IF Synthesizer (OK/FLT)
Data Clock Synthesizer (OK/FLT)
I Channel (OK/FLT)
Q Channel (OK/FLT)
AGC Level (OK/FLT)
Demodulato
r Stored
Faults Command:
Response: >add/DSF_# hh:mm:ss MM/DD/YY'cr'
MOD_xxx'cr'
CD_xxx'cr'
SYN_xxx'cr'
ICH_xxx'cr'
QCH_xxx'cr'
DSCR_xxx'cr'
BERT_xxx'cr''lf']
Demod Module (OK/FLT)
Carrier Detect (OK/FLT)
IF Synthesizer Lock (OK/FLT)
I Channel (OK/FLT)
Q Channel (OK/FLT)
Descrambler (OK/FLT)
BER Threshold (OK/FLT)
Interface
Transmit
Side Stored
Faults Command:
Response: >add/ITSF_# hh:mm:ss MM/DD/YY'cr'
CLK_xxx'cr''lf']
TAC_xxx'cr'
(See Note)
Selected Transmit Clock Activity (OK/FLT)
Transmit Audio Clip (OK/FLT)
Note: Status only returned when ADPCM board is
installed.
Interface
Receive
Side Stored
Faults Command:
Response: >add/IRSF_# hh:mm:ss MM/DD/YY'cr'
CLK_xxx'cr'
UNFL_xxx'cr'
OVFL_xxx'cr''lf']
RAC_xxx'cr'
(See Note)
DMXL_xxx'cr' (See Note)
HOOK_xxx'cr' (See Note)
Selected Buffer Clock Activity (OK/FLT)
Buffer Underflow (OK/FLT)
Buffer Overflow (OK/FLT)
Receive Audio Clip (OK/FLT)
Demultiplexer Lock (OK/FLT)
Remote Off Hook Fault (OK/FLT)
Note: Status only returned when ADPCM board is
installed.