Comtech EF Data RCS10 - Manual (Page 71)

Operation RCS10 Redundant Communication System
Page 3-24 TM058 - Rev. 2.3
- Press 'DATA RATE' soft key.
- Press 0 5 1 2
- Press 'ENT' button. (You have now selected a data rate of 512 Kbps).
The modem will now ask “Do you want the transmitter turned back on” Select Yes or No as
desired.
- Press 'MODE' soft key.
- Press 'DRP & I' soft key.
The modem will now ask if you want the transmitter turned back on. Select Yes or No as desired.
- Press 'DEMOD CONFIG' button.
- Press 'DATA RATE' soft key.
- Press 0-5-1-2
- Press 'ENT' button. (You have now selected a data rate of 512 Kbps).
- Press 'MODE' soft key.
- Press 'DRP & I' soft key.
- Press 'INTF CONFIG' button.
- Press 'NEXT' soft key.
- Press 'TX TYPE' soft key.
- Press 'UP' or 'DOWN' soft key repeatedly to scroll through the interface formats until
G.703.U.E1 appears.
- Press 'ENT' button.
- Press 'RX TYPE' soft key.
- Press 'UP' or 'DOWN' soft key repeatedly to scroll through the interface formats until
G.703.U.E1 appears.
- Press 'ENT' button.
- Press 'NEXT' soft key until you get to the display where you can change the 'TX D&I
MODE'.
- Press 'MODE' soft key.
- Press 'MORE' soft key.
- Press 'PCM-30' soft key.
The modem will now ask if you want the transmitter turned back on. Select Yes or No as desired.
- Press 'NEXT' soft key.
- Press 'MODE' soft key.
- Press 'MORE' soft key.
- Press 'PCM-30' soft key.
- Press 'NEXT' soft key until you get to the display where you can change the 'T1E1
FRAME SOURCE'.
- Press 'T1E1' soft key.
- Press 'EXTERNAL' soft key. (The modem will automatically select buffer clock source to