Comtech EF Data RCS10 - Manual (Page 268)

RCS10 Technical Specifications Appendix A
Page A-16
18 = Trellis 8/9 Rate, 19 = Comstream SEQ 3/4 rate 20 = TPC.793 2D, 21 = TPC.495 3D, 22 =
TPC.325 3D)
Change <1> Alarm 5 Masks to:
(Bit 0 = Trellis Decoder Lock, Bit 1 = FM DSP Lock Mask, Bit 2 = T1 signaling fault, Bit 3 = Turbo
Codec lock fault, Bits 4 – 7 = Spares)
Change Status Bytes <1> Alarm 5 to:
(Bit 0 = Trellis Decoder Lock, Bit 1 = FM DSP Lock Mask, Bit 2 = T1 signaling fault, Bit 3 = Turbo
Codec lock fault, Bits 4 – 7 = Spares)
Add to the end of Status Bytes:
<1> Spare
<4> Symbol Rate (Binary Value, 1bps steps)