Rcs10 redundant communication system – Comtech EF Data RCS10 User Manual
Page 4
RCS10 Redundant Communication System
Record of Revisions
TM058 - Rev. 2.3
ii
RCS10 Redundant Communication System
Installation and Operation Manual
TM058 - Record of Revisions
Radyne ComStream Corporation is constantly improving its products and therefore the information in this
document is subject to change without prior notice. Radyne ComStream Corporation makes no warranty of
any kind with regard to this material, including but not limited to the implied warranties of merchantability and
fitness for a particular purpose. No responsibility for any errors or omissions that may pertain to the material
herein is assumed. Radyne ComStream Corporation makes no commitment to update nor to keep current
the information contained in this document. Radyne ComStream Corporation assumes no responsibility for
use of any circuitry other than the circuitry employed in Radyne ComStream Corporation’s systems and
equipment.
Revision
Level
Date
Reason for Change
1.0
2-28-97
Initial Release
1.1
4-15-97
Added menu screens, updated serial communications protocol, enhanced
Operation section, added DIP Switch Configuration
2.0
3-1-98
Added TUV CE warning data and Reed-Solomon Data
2.1
1-11-99
Added J10 Async Connector Table 2-10, Updated, reformatted and annotated
operation Screens, added Ethernet information
2.2
7-21-99
Deleted Hayes Modem Info., Updated Alarms Operation Screens, Updated Remote
Specs., updated User MIB
2.3
4-07-00
Added ‘Learn Mode’ feature information, Baseband Framing/Multiplexing and
updated R CS10/DMD10 Remote Specs, added SNMP control data.
Added addendum 7 -22-03.