beautypg.com

Storing and recalling 5 configurations, Dmd10 i & q ports – Comtech EF Data RCS10 User Manual

Page 20

background image

Addendum

RCS10 Modem and Redundancy Control System

TM058 - Rev. 2.3

xx


1.

Go to the ‘Demod Confg’ Screen

2.

Press the ‘Next’ Key 8 times.

3.

‘Pairing’ will appear. Press ‘Swapped’ or ‘Normal’ as applicable.

Storing and Recalling 5 Configurations


1.

From “Interface”, go to the ‘Confg’. The ‘Modem Configuration Copy’ Screen (Refer to Figure 1) will

appear.

Figure 1.


2.

Press the ‘Tab’ Button to select between ‘Copy from:’ and ‘Copy to:’.

3.

Press the ‘Up’ or ’Down’ Buttons to select ‘Confg1‘ - ‘Confg5’ (the five configurations).

DMD10 I & Q Ports

(Refer to Figures 2 and 3)