Comtech EF Data RCS10 - Manual (Page 267)

Appendix A RCS10 Technical Specifications
Page A-15
B.1.4 Global Response Operational Codes
Change the last Modem Response Error Codes Description and Opcode of the first group to
MPARM_AUPCDEFPOWER_ERROR 0x43F.
Add the following Modem Response Error Code Descriptions and Opcodes to the bottom of the first group
(following MPARM_AUPCDEFPOWER_ERROR 0x43F):
MPARM_CONFIGURATIONSOURCE_ERROR 0x440
MPARM_CONFIGURATIONDESTINATION_ERROR 0x441
MPARM_CONFIGURATION_ERROR 0x442
B.2 Remote Port Packet Structure
Modulator Opcode <2400H>
Change <1> Convolutional Encoder (18 =… to:
18 = Trellis 8/9 Rate, 19 = Comstream SEQ 3/4 rate 20 = TPC.793 2D, 21 = TPC.495 3D, 22 =
TPC.325 3D)
Modulator Opcode <2607H>
Change <1> Convolutional Encoder (18 =… to:
18 = Trellis 8/9 Rate, 19 = Comstream SEQ 3/4 rate 20 = TPC.793 2D, 21 = TPC.495 3D, 22 =
TPC.325 3D)
Demodulator Opcode <2401H>
Change <2> Sweep Delay to:
(Binary value, 0.1 second steps. Reserved)
Change <1> Convolutional Decoder (18 =… to: