Comtech EF Data RCS10 - Manual (Page 270)

RCS10 Technical Specifications Appendix A
Page A-18
Opcode: <2C0BH> Command modem terminal emulation
<1> Emulation Mode (0 = Add viewpoint, 1 = VT 100, 2 = WYSE50)
Opcode: <2C0CH> Command modem terminal baud rate
<1> Baud Rate (0 = 300 baud, 1 = 600 baud, 2 = 1200 baud, 3 = 2400 baud, 4
= 800 baud, 5 = 9600 baud, 6 = 19200 baud, 7 = 38400 baud)
Opcode: <2C0DH> Command modem configuration copy
<1> Source Configuration (0 = current, 1 = configuration 1, 2 = configuration 2,
3 = configuration 3, 4 = configuration 4, 5 = configuration 5)
<1> Destination Configuration (0 = current, 1 = configuration 1, 2 = configuration 2, 3
= configuration 3, 4 = configuration 4, 5 = configuration 5)
Note: Source and destination configuration configurations must be different. Error 0x441
will be returned if they are the same.