Comtech EF Data RCS10 - Manual (Page 274)

RCS10 Technical Specifications Appendix A
Page A-22
1. Go to the ‘Demod Confg’ Screen
2. Press the ‘Next’ Key 8 times.
3. ‘Pairing’ will appear. Press ‘Swapped’ or ‘Normal’ as applicable.
Storing and Recalling 5 Configurations
1. From “Interface”, go to the ‘Confg’. The ‘Modem Configuration Copy’ Screen (Refer to Figure 1)
will appear.
Figure 1.
2. Press the ‘Tab’ Button to select between ‘Copy from:’ and ‘Copy to:’.
3. Press the ‘Up’ or ’Down’ Buttons to select ‘Confg1‘ - ‘Confg5’ (the five configurations).
DMD10 I & Q Ports
(Refer to Figures 2 and 3)