Comtech EF Data CDM-840 - Manual (Page 72)

CDM-840 Remote Router Revision 2
Ethernet-based Remote Product Management MN-CDM840
6–4
Two Community Strings are defined for SNMP access:
• Read Community default = public
• Write Community default = private
For proper SNMP operation, the CDM-840 MIB files must be used with the
associated version of the CDM-840 Outdoor Remote Router M&C. Refer to the CDM-
840 FW Release Notes for information on the required FW/SW compatibility.
6.4 Web Server (HTTP) Interface
A user-supplied Web browser allows the full monitoring and control (M&C) of the CDM-840
from its Web Server Interface. This non-secure embedded Web application is designed for, and
works best with, Microsoft Internet Explorer Version 7.0 or higher.
6.4.1 User Login
Type the CDM-840 Management IP Address (shown here as http://xxx.xxx.xxx.xxx) into the
Address area of the user PC Web browser:
The login page, similar to the example
shown here, opens. Enter the assigned
User Name and Password – the default for
both is comtech. Click [Log On].
If the User Name and Password are
accepted: The CDM-840 Web Server
Interface Home page, similar to the
example shown here, appears: